45 views



WELL COMPLETION AND WORK OVER

WELL COMPLETION AND WORK OVER

Hotel Golden Flower, Bandung | 26 – 28 Maret 2013 | IDR  9.750.000
Hotel Golden Flower, Bandung | 3 – 5 December 2013  | IDR  9.750.000

 

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  •  Memahami prinsip-prinsip dasar penyelesaian sumur produksi minyak dan gas bumi (oil and gas well completion)  .
  • Melakukan diagnosis sederhana dalam menagani problema pada sumur produksi di lapangan yang disebabkan oleh reservoir atau fasilitas produksinya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk sumur-sumur minyak yang diproduksikan dengan cara gas lift, ESP, Hydraulic/Jet Pump, Sucker Rod Pump dan PCP.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perancangan dan perancangan ulang penangan problema kepasiran di sumur produksi.

 

PRE-REQUISITE :

  •  Latar belakang  : Operator/ Sr. Operator/ Jr. Engineer/Non Engineer

 

MATERI KURSUS :

  1. Pendahuluan
  2. Penyelesaian sumur (Well Completion)

Tipe-tipe penyelesaian sumur

  1.  Tipe penyelesaian sumur berdasarkan pemasangan pipa selubung
  2.  Tipe penyelesaian sumur berdasarkan jumlah zona produksi

Peralatan bawah tanah

  1. Pendahuluan
  2. Peralatan produksi bawah sumur

Penyelesaian sumur untuk sumur-sumur pengangkatan buatan

  1. Sucker Rod Pump (Pompa angguk)
  2. Electric Submersible Pump
  3.  Gas lift
  4. Hydraulic Pump
  5. Pompa Jet
  6. Kerja ulang sumur (Work Over)

Faktor-faktor penyebab kehilangan produksi

  1. Problem Reservoir
  2. Problem mekanikal

Perawatan sumur

  1. Kerusakan Peralatan
  2. Masalah Parafin
  3. Pengendapan Scale dan Pengontrolannya
  4. Masalah Pasir
  5. Kerusakan Formasi

Tipe-tipe Pengerjaan Kerja Ulang Sumur

  1. Mengubah Zona Produksi
  2. Perangsangan Sumur (Well Stimulation)
  3. Squeeze Cementing

Peralatan Kerja Ulang

  1. Menara (Rig) Konvensional
  2. Unit Wireline
  3. Gulungan Tubing Tanpa Sambungan (Endless Tubing Coil)
  4. Unit Snubbing

 

Sand Control Technology

Sand Control Concept

  1. Reason for Sand Control
  2. Determining Need for Sand Control
  3. Selecting Type of Control
  4. Proper Drilling and Completion

Gravel and Screen Selection

  1. Slot and Gravel Size Design
  2. Slotted Liners
  3. Screens
  4.  Prerpacks

Inside Gravel Packing

  1. Perforation Packing
  2. Two Stages Methods
  3. Use of Viscous Carrying Fluid
  4. Downhole Equipment
  5.  Type of Operation
  6.   Sigle Stage Methods

Open Hole Gravel Packing

  1. Conventional Methods
  2. Special Tools and Operations
  3. Zone Isolation Methods
  4. Model Study Result
  5. Deviated Well Problem and Solutions

Consolidation

  1. Formation Consolidation
  2. Consolidation System Features
  3.  Well Preparation and Design Factor
  4. Consolidated  Packs
  5. Water Base Systems
  6.  Thermosetting Gravel Packs

Stable Arc Sand Control

  1.  The Stable Concept
  2.  Applying Stress for Sand Control
  3. Conventional Cementing Limitations
  4. Downhole Equipment
  5. Type of Operation

 

 

INSTRUKTUR :

  1.  Dr.Ir. Sudjati Rachmat, DEA

ASISTEN :

  1. Ir. Gilang Airlangga

Dr. Ir. Sudjati Rachmat, DEA was graduated from Petroleum Engineering Department of ITB in 1979 and hold Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France. The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Fluid Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA,

 

VANUE AND DATE

Vanue  : Hotel Golden Flower  Bandung

Date

  • 26-28 Maret   2013  ( Batch I )
  • 3-5 December 2013 ( Batch II)

 

INVESTATION

IDR  9.750.000,- /Participant Non residential. Fir send 3 participant from the same company IDR. 8.250.000,-/participant.

 

FACILITIES

  •   Training Kit
  • Soft Copy Material Training On Flashdisk 4GB.
  • Coffee Break & Lunch
  • Certifikat
  • Souvenir
  • Additional Program (optional)

 

My Fieldset
  1. (required)
  2. (valid email required)
 

cforms contact form by delicious:days

 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • Google Bookmarks
  • Y!GG
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • MySpace
  • Technorati
  • YahooMyWeb
  • YahooBuzz

Leave a Reply